Mississippi Gulf Coast Asphalt Paving Built on Reputation, Not Shortcuts
For more than 8 years, LMA Paving and Sealcoating has delivered professional asphalt paving services across Gulfport, Biloxi, Ocean Springs, and Slidell with one standard that never changes: do the job the right way. We are licensed through the Mississippi State Board of Contractors (#25749-MC), and every project we take on reflects the reputation we’ve spent years building in the communities we serve.
Whether you need a new commercial parking lot, a full site paving project, or a replacement of deteriorated pavement, LMA brings the experience, equipment, and integrity to get it done properly the first time. No shortcuts. No overpromises. No inaccurate job scopes.
Benefits of Professional Asphalt Paving
Properly installed asphalt is one of the most durable and cost-effective surfacing options available for commercial properties. When paving is done right from the start, you protect your investment for decades.
- Long-Term Durability – Correctly installed asphalt withstands heavy traffic, Gulf Coast heat, and seasonal weather cycles without premature failure.
- Smooth, Professional Appearance – A well-paved surface improves the look of any commercial property and creates a positive first impression for customers and tenants.
- Cost Efficiency Over Time – Quality installation reduces the need for early repairs, saving property owners significantly over the life of the pavement.
- ADA and Code Compliance – New paving projects are laid out to meet current accessibility and drainage requirements from day one.
- Improved Drainage – Proper grading and compaction prevent standing water and the base damage that follows.
- Increased Property Value – A clean, well-maintained paved surface adds measurable value to commercial properties throughout the Gulf Coast region.
Our Asphalt Paving Process
We don’t cut corners on preparation — because the quality of any asphalt surface starts well before the first load of hot mix arrives on site. Every LMA paving project follows a structured process designed for lasting results.
- Site Evaluation – We walk the property, assess existing conditions, review grading needs, and provide an accurate job scope with no surprises.
- Subbase Preparation – We address the foundation first, ensuring proper compaction and grading to support long-term performance.
- Hot Mix Asphalt Installation – We use quality hot mix asphalt applied at the correct depth for your traffic load and use case.
- Compaction and Rolling – Thorough compaction ensures density, smoothness, and resistance to cracking over time.
- Final Inspection – Every project ends with a walkthrough to confirm the work meets our standards and yours. We won’t stop until the job is done the right way.
Why Choose LMA Paving and Sealcoating
LMA was founded by Brent Scelson, who spent years as a supervisor at a local paving company before starting his own. That background means he saw firsthand what goes wrong when contractors take shortcuts — and built LMA specifically to do things differently.
- Licensed MS Contractor – We hold Mississippi State Board of Contractors License #25749-MC, providing commercial clients confidence in our qualifications.
- 8 Years of Gulf Coast Experience – Since 2018, we’ve been paving commercial properties across the Mississippi Gulf Coast and into Louisiana.
- No Shortcuts, Ever – Our company was built on the principle that you always do right by the customer. That means accurate scopes, honest timelines, and quality you can see.
- Transparent Job Scoping – We will never oversell a project or pad a scope. You get exactly what your property needs — nothing more, nothing less.
- Community-First Reputation – We’ve built our business in the communities we live and work in. Our reputation is everything, and we protect it on every job.
- We Won’t Stop Until It’s Right – Our customer promise is simple: we don’t walk away until the job is done correctly.
Asphalt Paving FAQs
What is the best time of year for asphalt paving in Gulfport and Biloxi?
The Gulf Coast’s mild climate allows for asphalt paving nearly year-round. Spring and fall are ideal due to moderate temperatures, but our crews are equipped to work through the region’s heat and humidity safely and efficiently.
How thick should asphalt be for a commercial parking lot?
Commercial parking lots typically require a minimum of 2–3 inches of compacted asphalt over a properly prepared aggregate base. High-traffic or heavy-load applications may require additional depth. We assess your specific conditions and recommend the correct specification.
Can you pave over existing asphalt?
In some cases, yes — an overlay may be appropriate if the existing base is structurally sound. If the base has failed or there is significant rutting or cracking, a rip out and replace is the more durable solution. We will give you an honest assessment of which option fits your situation.
Do you offer free estimates?
Yes. We provide free, on-site estimates for all commercial asphalt paving projects throughout Gulfport, Biloxi, Ocean Springs, and Slidell, LA.
Related Services
Maximize your paving investment with our full range of asphalt services:
- Asphalt Overlay – A cost-effective renewal option for structurally sound surfaces that have lost their top layer integrity.
- Rip Out and Replace – When the base has failed, full removal and replacement delivers a like-new surface built to last.
- Sealcoating – Protect your new asphalt from UV damage, water infiltration, and oxidation with professional sealcoating.
- Asphalt Maintenance – Proactive maintenance programs extend pavement life and reduce long-term ownership costs significantly.
Get a Free Asphalt Paving Estimate in Gulfport, MS
LMA Paving and Sealcoating serves commercial properties throughout Gulfport, Biloxi, Ocean Springs, MS, and Slidell, LA. If your property needs new paving, a site assessment, or a second opinion on a previous scope, we’re ready to help.
Call us at 228-305-0195 or Contact Us to schedule your free on-site estimate. We’ll show up, walk the property, and give you a straight answer — no pressure, no inflated scopes.
